High performance with innovative electronic motor, and energy saving up to 65%. IC electronic detection, automatic power-off protection upon no water. Features a wear-resistant ceramic shaft, as a way to have a longer operation life.
1.Steady Waft Mode (20 levels),The screen show the number (101) The pump will work in this mode when powered on.you’ll be able to change the speed by the key of “speed”.when the indicator screen shows the number “101”,that means you have select the lowest Waft rate,when the indicator screen shows the number “120”,that means maximum Waft rate.
2.Wave making Mode(20 levels),The screen show the number (201) Wave was once generated by the changing of Waft rate(from starting Waft to max Waft)and need two step of settings:Starting Waft and Wave length. 1).Starting Waft:Before working in wave mode,you must adjust the starting Waft(Mode 1)into minimum 103 (the starting Waft 500L/H),110 the starting Waft 1500L/H.Maximum starting Waft 115(3500L/H) 2).Wave length:After the setting of mode 1,press the key of “mode”into mode 2(wave mode),the press “+” “-” to change the wave length(20 levels).
3.Sine mode,The screen show the number (301) In this mode,The power more than a few between 30%–100% and the regulation looks like a sine curve.
Pump Power Supply: DC 24 V – 2.5 A
Max. Waft Rate: 1052 GPH
Max. Head pressure: 11.5 ft.
Transformer: 110 V-240 V / 50-60 Hz
Max. Power Consumption: 35 Watts
Max. Work Temp: 95℉
Inlet Size: 1 1/4″
Outlet Size: 1 1/4″
Output adapter (fit for 3/5″, 3/4″ and 1″ id hose)
Pump Dimensions: 7″ x 3.15″ x 4.33″
Controller Dimensions: 4″ x 2.36″ x 1″
What’s in the Box?
DC-4000 Controllable Pump
DC 24V Power Supply
★The same type of pump have jebao dct dcs series pump- vectra pump-abyzz dc pump-Waveline pump and so forth, Can operate in Marine and Fresh Water.
★This Controllable DC Pump used sine wave technology,Dc return pump mode:contant speed ,wave mode ,sine mode ,feed mode.Variable speed keep an eye on with up to 20 different speed settings, offering precise adjustment of water Waft for optimum performance .
★Wavemaker mode and sine mode- It is same as the jebao wavemake W1 W2 MODE.
★One click Feed mode (10 Minutes stop)，Soft start operation – pump gradually builds up to set Waft rate，100% Copper components free, protected for any tank！
★Low voltage, protected，IC Electronic Detection, automatic power-off protection upon no water,Motor protection if rotor is blocked. With wear-resistant ceramic shaft, longer operation life.