The Bresle Chloride Test Kit is without doubt one of the most popular tests for extracting and measuring the salt contamination on blast-cleaned substrates. This Chloride Test on steel or Salt Test on steel the use of the Bresle Patch or Bresle Sampler method will help to prevent coating failure because of salts such as chlorides and sulphates contaminating the surface prior to the coating application. This contamination may also be tested quickly and simply the use of the Bresle Test. Easy to use, pour 10mls of distilled water into the beaker and resolve the conductivity the use of the Conductivity Meter. Take a Bresle Patch and apply to the test surface. Fill the syringe with 2.5mls of test water and insert through the adhesive foam into the test chamber. Inject the contents, then extract back into the syringe. Repeat ten cycles of injecting and extracting, then transfer the test water back into the beaker. Measure the test water with the Conductivity Meter and deduct the initial conductivity reading from the result. Multiply the readings by 0.4 to give the quantity of salts in g/cm sometimes called ppm, or by 4 for the quantity of salts g/m. The maximum permissible surface density of salts on the steel surface prior to surface remedy depends on the kind of paint to be applied and what the finished material or product is to be used for. Surface remedy specifications will have to, subsequently, state the highest permissible surface density of salts for each particular application. Complies with International Standards: ISO 8502-6 and ISO 8502-9. Additional packs of Bresle Patches may also be purchased to carry out further tests the use of this kit. Supplied with 50 Bresle Patches, Conductivity Meter, Calibration Solution, 3 5ml Syringes, 25ml Beaker, 250ml Distilled Water and Carrying Case.
Patches Supplied : 50 Standard & 50 High Adhesion
Conductivity Meter Range : 0-199S/cm – 0.20-1.99S/cm
Conductivity Meter Resol : 1S/cm – 0.01mS/cm
Conductivity Meter Accuracy : 2%
Kit Contents: Supplied with 100 Bresle Patches, Conductivity Meter, Calibration Solution, 3 5ml Syringes, 25ml Beaker, 500ml Distilled Water and Industrial Foam-Filled Carrying Case.