Plug and play design, Simple to make use of;
Dual relay output, have the ability to connect with refrigeration and heating equipment on the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, have the ability to display measured temperature and set temperature on the same time;
Compressor delay protection for refrigeration Regulate
High and low temperature alarms are to be had;
Over-temperature and sensor fault alarm
Heating/Cooling differential serve as might be set one after the other for refrigeration and heating to give protection to temperature controller from violent change.
Temperature Regulate Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Regulate Mode :On/Off Regulate, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Regulate Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
F/C degree display; Simple to setup.
The sensor can easily be replaced.
Maximum output load: 1100W (120V).
Alarm when over-temperature and sensor error.
Dual display window, have the ability to display measured temperature and set temperature on the same time.