Two Working Mode (Cool & Heat)
√ Cooling Mode：If Measured Temperature ≥ (setting temp. + temp. difference), the cooling process will operate. Another way, the cooling process will stop.
√ Heating Mode: If Measured Temperature ≥ (setting temp. + temp. difference), the heating process will stop. Another way, it’s going to start.
* Temperature Measuring Range: -40℃ to 100℃
* Temperature Regulate Range: 16℃ to 40℃
* Resolution: 0.1℃
* Accuracy: +/- 1℃
* Ambient Requirements: -10℃ to 60℃, 20% to 85% (humidity)
* Product Consumption: ≤ 3W
* Input Voltage: 110V ac
* Output: resistive load≤1100W/110V, inductive load≤138W/110V, filament lamp≤110W/110V
* Sensor Cable Length: 39.4″
* Item Size: 5.32 * 2.17 * 1.38″
Q1: Learn how to switch between HEAT/COOL mode?
A1: Press H/C Key to switch the mode between HEAT and COOL in normal working status.
Q2: Learn how to set up DIFF (Temperature Difference)?
A2: Press SET Key in normal working status to display the default DIFF value at the same time as icon DIFF flashing, then press UP or DOWN Key to adjust the ideal temperature difference you need.
Q3: Learn how to set up DELAY (Compressor Delay)?
A3: Press SET Key to display the default DELAY value at the same time as icon DELAY flashing, then press UP or DOWN Key to adjust the ideal compressor delay time you need. Then press SET to save and exit.
Q4: Learn how to set up the temperature?
A4: Press UP or Down Key in normal working status to display the default stop temperature value at the same time as icon ℃ flashing, then press UP or DOWN Key to adjust the ideal stop temperature you need.
Q5: Learn how to switch between Celsius and Fahrenheit?
A5: Press SET key in normal working status for 5 seconds.
Dual working modes: COOL & HEAT
Adjustable output delay function to offer protection to compressor
Give a boost to reading with Centigrade or Fahrenheit unit
Plug and play design, easy to make use of
Widely used in aquarium, reptile market, incubators, green house, refrigerator and so forth